Step 1: Line Up the Pieces

Choose the pieces you want to connect based on your desired pole height. This may include body segments, the bottom spike, or the top cap. Each piece uses three nubs that align with three matching twist lock notches.

Actions
• Identify the parts you want to connect
• Align the three nubs with the three notches
• Confirm each nub is lined up before pressing together

Tip
If pieces do not slide together easily, recheck alignment. Do not force them.

Step 2: Insert the Leafy Support Ring

Place a leafy support ring between the two aligned pieces. This ring adds stability and rotates so the supports can gently guide climbing stems.

Actions
• Pick up the support ring
• Place it between the two pole sections
• Make sure it sits flat and centered

Step 3: Connect and Twist to Lock

With the ring in place, press the pieces together and twist to lock.

Actions
• Press the pieces together with the ring between them
• Twist to the right to lock
• Twist to the left to unlock if you need to adjust

Important:
There is no clicking or snapping sound when the pieces lock. A smooth twist with resistance means the connection is secure.

Tip:
Always twist using the solid top and bottom connection collars. Do not squeeze the middle body of the pole while twisting.

Step 4: Fill with Substrate and Stake in the Pot

Once assembled, fill the pole with your preferred substrate and anchor it into the pot near the plant base.

Actions
• Fill the pole with moss or your chosen substrate
• Lightly pack so it holds shape while allowing airflow
• Note that filling the pole also adds strength and stability to the overall structure
• Push the spike deep into the soil close to the plant base
• Firm the soil around the base with your fingers
• Water the soil and the pole after installing

Important
If the pole leans, it usually means the spike is not deep enough or the soil is too loose. Push the pole deeper and firm the soil more tightly around the base. We also offer an Anchor Base for added stability, especially helpful for larger plants or heavier top growth.

Step 5: Guide Your Plant Gradually

Moss poles are designed to support and guide upward growth over time, not to force heavy stems into position.

Actions
• Use the leafy supports to gently guide stems toward the pole
• Adjust supports slowly over several days or weeks
• Do not pull thick stems sideways toward the pole

Important
Although the built in supports help guide climbing growth, mature plants that need to be retrained often benefit from additional soft plant ties. This provides extra security while the plant adjusts.

Avoid bending the moss pole to reposition your plant. The pole is designed to remain straight for strength and structure. Bending or flexing can weaken the material and may cause breakage.

Tip:
If your plant is already leaning strongly to one side, guide it gradually rather than trying to correct everything at once.

Step 6: Add More Sections as Your Plant Grows

You can expand your moss pole anytime by repeating the same process.

Actions
• Align the new piece with the top of the pole
• Insert a support ring
• Press and twist to lock
• Repeat until you reach your desired height

Congratulations! You've successfully assembled your 3D-printed moss pole.This sturdy and supportive structure is now ready to help your plants thrive, providing an ideal environment for them to climb and grow.

------------------------------------------

For Larger or Heavier Plants

For mature monsteras or thick stems, we recommend using the Giant pole size. It is designed for heavier growth and provides stronger long term support.

Important Care Note

Parts are designed to align, press gently, and twist to lock in place. Too much force, bending, squeezing, or over twisting can cause cracks or damage. If a section feels stuck or something does not feel right, stop and recheck alignment.

For more detailed tips and care guidance, see our full guide here:
https://leafycove.com/blogs/lush-hour/guide-to-3d-printed-moss-poles

Questions? You can always reach us at:
care@leafycove.com

Enjoy free carbon neutral shipping on orders $35+, with premium and international shipping options available at checkout.

If you need your order sooner, please reach out to us at care@leafycove.com and we will do our best to accommodate your timeline.

Every piece is thoughtfully made to order in our Oakland, California studio using sustainable materials and small batch production methods. Your item is created specifically for you, not pulled from a warehouse shelf.

Production typically takes 5 to 7 business days (1-2 weeks) for most orders. Orders placed after 3:00 PM Pacific Time begin processing the next business day. Weekends, holidays, and studio closure days do not count toward production timelines.

Orders ship once all items in your order are complete. Shipping transit time begins after your order has finished production and is handed off to the carrier. Delivery estimates provided by carriers are for reference and are not guaranteed.

For full shipping details, please review our full shipping policy:
https://leafycove.com/pages/shipping-policy

Questions? You can always reach us at:
care@leafycove.com